
HS code 8205 70 00 · US HTS 8205.70.00.90
Set · Orbital Set
Tilt and turn the piece. It stays centred. The Orbital Clamps hold the sphere, so you tilt and turn the piece in all directions and it stays centred under the microscope. The Mini Chuck holds ear studs and the smallest pins from 0.3 to 3.6 mm; the Shellac Plate holds pieces set in shellac.
In the box
JURA Orbital Clamps (pair), with sphere and screw
JURA Mini Chuck 0.3–3.6 mm
Shellac Plate
SKU QC.08.SET
Good to know
Sphere and screw included: they come with the Orbital Clamps
The Mini Chuck, the Shellac Plate and the 4-Jaw Chuck all sit on the same sphere
Vise not included
Spare sphere and screw: Replacement Orbital Fixture
At the bench
Tilt and turn
The sphere lets the piece tilt and turn in every direction, without re-clamping.
Stays centred
The work stays centred under the microscope while you move it.
One sphere, more tools
Mini Chuck, Shellac Plate and 4-Jaw Chuck all fit the same sphere.
Shown: the Orbital Set.
Take it to the next level
The Eccentric Basic Set gives you the vise with the QC system. The 4-Jaw Chuck sits on the same sphere.
EC.85.QC.BS
The vise with the JURA QC system
JURA Eccentric Ball Vise 85 mm with the QC system, the base for the Orbital Clamps.
3X.19
Four jaws on the same sphere
The pin at the bottom sits in the sphere of the Orbital Clamps.
Explore more
Personal advice
Not sure which clamp suits your work? Tell us what you set or engrave, and we will advise you.
Photos are an indication: we keep developing our products, so details may differ slightly.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.