
New for the USA ★★★★★
Nothing to pay at your door · 9 Nov – 31 Dec 2026
One price, US import duties included – from our bench to yours · Terms & conditions apply
New for the JURA Family
Personal get-started call
Free with every JURA machine (30 min) and vise set (20 min) – book via your order confirmation
Only for orders placed directly in our webshop juratools.com
Plus €100 off a day at the JURA bench with every machine
Holiday shipping
Last shipments of 2026: 18 December
Orders after that leave our bench from 4 January 2027
Efficiency, ergonomics and power — for the best workflow at the bench.
Our gifts to you
The JURA Christmas gift worth €75
Personally selected for you – with every order above €1,500
The JURA T-shirt on top worth €35
Above €3,000 – Jura’s portrait on the back, in your size
Developed at our own bench
Our machines are developed by Jura. The goal is an efficient and healthy working environment, without unnecessary disturbing factors.
We develop, produce and service every machine ourselves. The lines are short, and we know the slightest vibration and sound of each one.

Developed by master setter Jura, built and serviced in our own family company.
The JURA difference
The compressor is the most disturbing factor in engraving work. JURA machines run without one. Sixteen years of development stand behind that.
Most setters work from home, often in one room, and many work at night. A compressor cannot run at those hours. Many also travel to shows, where a machine has to be plug and play.
No compressor
Full engraving power straight from the machine.
Only the hot and cold air guns of the Graver PRO use a small compressor.
Versatile
Engraving, hammering, sculpturing, texturing and filing. With the micromotor of the Graver Plus and Graver PRO also drilling, burring, polishing and micro-filing. All in one unit.
Silent and energy saving
No compressor running beside you or switching on. One compact machine, quiet and economical.
Low maintenance
No compressor to service, no filters and no oil.
No oil damage
No oil from compressed air running through your system, so a low risk of damage.
Compact
No space needed for a compressor. Plug in and start, with nothing in the way at your bench.
Ergonomic
Low in vibration, with handpieces that sit comfortably in the hand for long hours at the microscope.
Organized
Organizers and holders are included, for a tidy and efficient workplace.
Portable
Easy to take with you for a demonstration or presentation.
Built in our own workshop in the Netherlands. Short lines: you speak directly with the people who build your machine, for advice, service and parts.
Workflow and control
Four machines, or all of it in one. Setting, engraving, polishing, grinding and filing: everything diamond setting and engraving asks for. Where functions can be combined in one unit, we combine them. Fewer machines on the bench, fewer interruptions to the work.
Everything is built for the same two things: a better workflow, and maximum power with maximum control. Neither is ever traded away.
Our machines
Recommended
engraving + micromotor · no compressor required
Best for
Diamond setting and engraving in one machine.
Good to know
Pneumatic engraving and a full-power micromotor in one unit, with no compressor. Comes with the JURA Slim Fit micromotor handpiece (EQ.14.01); other handpieces are optional upgrades.
pneumatic engraving · no compressor required
Engraving, hammering, sculpturing, texturing and filing, with full power and no compressor.
Takes all JURA engraving handpieces.
engraving + micromotor + air tools · no compressor for engraving
The complete workstation, plus hot and cold air.
Comes with the JURA Slim Fit micromotor handpiece (EQ.14.01). Only the hot and cold air guns need air: the small, affordable JURA Microcompressor is all it takes.
Compare the machines
On a phone, swipe the table sideways to see all columns.
| Graver | Graver Plus | Graver PRO | Polishing Motor | Micromotor Light | |
|---|---|---|---|---|---|
| Pneumatic engraving
|
Yes | Yes | Yes | — | — |
| Micromotor
|
— | Yes, full power | Yes, full power | Yes, full power | Yes, light, 3 N·cm |
| Hot and cold air guns
|
— | — | Yes | — | — |
| Engraving handpieces
|
Yes | Yes | Yes | — | — |
| Micromotor handpieces
|
— | Yes | Yes | Yes | Yes, no large burs |
| Best for
|
Engraving | Diamond setting and engraving | The complete workstation | Full-power micromotor work | Micro work and a second motor |
Setting and engraving in one machine
Choose the Graver Plus or the Graver PRO: pneumatic engraving and a full-power micromotor in one unit.
Complete your bench
lightweight, for micro work
Best for
Micro-filing, fine setting with small stones, and a second motor at the bench.
Good to know
A light, compact E-Type micromotor, 3 N·cm, sold as a set with the handpiece of your choice. Not for large burs or polishing mandrels.
graver sharpening
Best for
Shaping and sharpening your gravers without leaving the microscope.
Good to know
Add the E-Type Motor and a handpiece of your choice, and your Micro Grinder becomes a Micromotor Light as well: one control box for sharpening and micro work, your second micromotor at the bench.
for the Graver PRO air guns
Best for
Air for the hot and cold air guns of the Graver PRO.
Good to know
Small, quiet and affordable. Only the air guns of the Graver PRO need it.
Which handpiece fits your work?
Every engraving and micromotor handpiece is explained, with the machines it fits.
Explore more
Personal advice
Tell us what you set or engrave, and we will recommend the machine that suits your work.
All prices exclude VAT. Final VAT and shipping are applied at checkout based on your region and VAT registration status.